DIY: foil track mount on a polyester shortboard

[reyrivera]

Thanks for the insight Erik.

Your idea is a much simpler build with the inserts.
Since you have been using your board and have success with the foil placement, I will position the mast in the same general location compared to yours.

My slight advantage is I can move the mast forward or backwards once I get it up and running.

I won't be able to work on the board until the second week of August, work is keeping me from having fun...

[NorCalNomad]

Dude you should have gone to MacBeath Hardwood in Berkeley. They have good thin marine grade plywood and will sell you 1/4 sheets. Or I could have sold you my leftover 1/4 sheet from my foil build :P